Mariya
Last Update 8 месяцев назад
1. Open the battery compartment for the BBPOS WisePOS E by pulling the bottom left corner up and removing the cover. Place the rechargeable battery in the compartment and snap the cover back into place.
2. Hold the power button on the right side until the screen turns on.If the battery is low, the Card Reader won`t turn on when you press the Power button. To recharge the battery, plug the charging cable into the port with the lightning bolt on your device.
3. To connect to WiFi, go to Settings, Select WiFi settings, and choose the network you`d like to connect to. Remember, the device you`re using your YAMPOS account from and your Card Reader should be connected to the same WiFi network.
If you are already connected to a WiFi network but want to switch to a different one, go to WiFi settings and choose the new one. If your device is connected but still doesn't work, please use manual DNS. Go to WiFi settings on your computer and switch DNS automatically to manual using the IP address 8.8.8.8.
4. Assigning a name to your Card Reader can help you stay
organized.Name Card Reader
5. Swipe right across the screen of your Card Reader. Tap settings and a keypad should appear. Enter the admin PIN 0-7-1-3-9
6. Enter the pairing code from your Card Reader on your YAMPOS device.Pairing Code
If you didn`t get a pairing code, tap Generate Pairing Code again.
7. Your YAMPOS Card Reader is set up and ready to process payments.During the checkout process you`ll now see YAMPOS Card Reader listed as a payment methodLet`s go
